Air Conditioner and Heater Plumbing for 2005 Dodge Caravan
3/8. 3/4 inch, Red. Evaporator Side 10mm. 1/2 Evaporator to H-Valve. Up to 02/29/12. 1/2 Expansion Valve to Evaporator. Liquid. Valve to Evaperator. 10.25MM ID.
[15.5mm]. [15mm]. 15.51mm ID 2.63mm Thick. 15.51mm ID 2.63 thick. 3/4 Evaporator to H-Valve. 3/4 Expansion Valve to Evaporator. Suction. Valve to Evaperator. 15.54MM ID.
Suction Line to Expansion Valve. Suction Line to H-Valve. 5/8 inch. 5/8 Burgandy.
Suction Line to Expansion Valve. Suction Line to H-Valve. 5/8 inch. 5/8 Burgandy. Condenser End. Accumulator End. At Accumulator.
Liquid Line to Drier & Condensor. Contains 5103428AA- Gasket and 5102355AA - O-Ring. Discharge. To Compressor and Condenser.
Transmission Oil Cooler and Air Conditioning Condenser. NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
Liquid Line to Drier. Expansion Valve. 1/2 inch. Compressor And Condenser End.
Includes H-Valve to Evaporator O-Rings. Includes: Valve Mounting Screws, and Valve to Evaperator O-Rings. After 12/03/2003.
M8x1.25x20. Pressure Line to Engine Block. Battery Negative to Auto Transmission. Heat shield attacjing. Heat shield attaching lower. Engine Ground Strap at Head. Ground strap attaching. Ground strap to head. Hinge Pillar to Support.
M6x1x16. Throttle Control Bracket Attaching. Aluminum Plenum. Filler Tube to Transmission. Cable Bracket to Throttle Body. Throttle Cable Bracket Attach. Bracket Mounting. Throttle Cable to Bellcrank.
Wiring Bracket to Engine Crossover to Trans. Crossmember Attaching. RF T/O to Cylinder Head Right and Left. Ground Strap attaching at Head. Ground To Block. Engine Ground Left Head.
3/8. 3/4 inch, Red. Evaporator Side 10mm. 1/2 Evaporator to H-Valve. Up to 02/29/12. 1/2 Expansion Valve to Evaporator. Liquid. Valve to Evaperator. 10.25MM ID.
[15.5mm]. [15mm]. 15.51mm ID 2.63mm Thick. 15.51mm ID 2.63 thick. 3/4 Evaporator to H-Valve. 3/4 Expansion Valve to Evaporator. Suction. Valve to Evaperator. 15.54MM ID.
Includes H-Valve to Evaporator O-Rings. Includes: Valve Mounting Screws, and Valve to Evaperator O-Rings. After 12/03/2003.
M6x1.0. Flag Attaching. Instrument Panel Stack to Floor Brace. Left Heat Shield to Exhaust Manifold. Console to Floor. Floor Bracket to Floor.